Last Updated on June 5, 2022 by Md Deloar
Trekking poles are essential gear for any hiker, backpacker, or camper. Trekking poles provide support and stability on uneven terrain, and they can help you hike longer distances with less fatigue. But what do you do if your trekking pole collapses? This blog post will show you how to fix a collapsible trekking pole. With a few simple tools, you can easily fix your trekking pole and get back to enjoying the outdoors!
Table of Contents
How do collapsible poles work?
Collapsible poles are a great invention for hikers, campers, and backpackers. They can be used to support a tarp or tent, as a walking stick, or to help cross a creek. But how do they work?
Collapsible poles are typically made of three telescoping sections that fit inside one another. The sections are held together with locking mechanisms that keep them in place until you want to collapse the pole. To collapse the pole, you unlock the sections and pull them apart. This causes the locking mechanisms to release and the sections to slide inside. The collapsed pole then fits easily into a carrying case or backpack.
To extend the pole, you unlock the sections and pull them apart until they are at the desired length. The locking mechanisms will then automatically lock into place.
how to fix a collapsible trekking pole
A collapsible trekking pole is a handy tool to have when hiking. It provides stability and support when crossing difficult terrain. However, if the pole becomes bent or twisted, it cannot be easy to use. Here are a few tips on how to fix a collapsible trekking pole:
- If the pole is slightly bent, you may be able to straighten it by gently bending it back in the opposite direction.
- If the pole is severely bent or twisted, you will need to remove the sections and reattach them to straighten them out.
- To do this, hold the sections together and twist them in the opposite direction of the bend.
- Once they are straight, reattach them by pushing them together until they click into place.
- If the sections are stuck together, you will need to use some WD-40 or other lubricant.
- Once properly aligned, reattach them by pushing them together until they click into place.
- To remove any excess WD-40 or other lubricants, wash the pole with warm water and a soft cloth or paper towel that has been dampened with mild soap and water.
Inspection for a damaged collapsible trekking pole
Collapsible trekking poles are a great invention for outdoor enthusiasts. They take up very little space in a pack and can be used when hiking, camping, or bird watching. However, like any other piece of equipment, they are not immune to damage. A broken pole can quickly ruin a hike or camping trip.
A few things can be done to inspect for damage before using a collapsible trekking pole.
Check the trekking poles for damage
Collapsible trekking poles are convenient for carrying a spare pole on your hike, but they are also susceptible to damage. It is important to check the pole for damage before each use.
Hold the collapsed pole in one hand and extend it until it is completely straight. Look for any bends or kinks in the pole to check for damage. If you find any, do not use the pole. Also, look for cracks in the metal or plastic. If you find any, do not use the pole.
If there is no visible damage, try extending and collapsing the pole several times. If it feels loose or wobbly, do not use the pole.
It is also a good idea to check the condition of the shock cord and strap. The shock cord should be tight and free of kinks or tears.
Check the Locking Mechanism
When using a collapsible trekking pole, it is important to check the locking mechanism before each use. A locking mechanism that is not functioning properly can cause the pole to collapse while in use, leading to serious injury.
To check the locking mechanism, grasp the collapsed pole firmly and extend it fully with the other hand. The locking mechanism should hold the pole in place without any give. If there is any give, the locking mechanism is not functioning properly, and the pole should not be used.
Check the Mechanism Spring
To check the mechanism spring on a collapsible trekking pole:
- Unscrew the cap at the top of the pole.
- Hold onto the bottom of the pole while doing this so that it does not collapse on you.
- Look for any damage to the spring mechanism. If there is any damage, such as bent or broken parts, the pole should be replaced.
Check the screws and connections
When you are out on the trail, having a trekking pole in good condition can be very helpful. You can do a few things to help keep your trekking pole working well. One is to check the screws often to make sure they are tight. If they get loose, the pole can become unstable and could collapse while you are using it.
Another thing to check is the connections where the pole segments meet. Please make sure they are tight and have not become loose over time. If they have, you can fix them by using a screwdriver to tighten the screws or bolts that hold them together. Checking your trekking poles regularly will help keep them in good condition and safe for use when you need them most.
Replace the parts
A broken or damaged trekking pole can cause problems and even injury. If you have a collapsible trekking pole, it is important to inspect it for damage before each hike.
If you find any damage, such as a broken section or a loose screw, you should replace the parts immediately. A broken or damaged trekking pole can be dangerous, so it is important to take care of your gear and inspect it for damage before each hike.
oil the trekking poles
Inspection for a damaged collapsible trekking pole is a must before every use. Checking for damage, such as a broken weld, loose screws, or cracks in the pole itself, can prevent an accident. If you discover a problem with your trekking pole, lubricate the joint before using it. Putting a light coating of oil on the threads and joints will help keep them moving smoothly and prevent them from seizing up.
FAQ On how to fix a collapsible trekking pole
How do you assemble collapsible trekking poles?
Collapsible trekking poles are typically composed of three main sections: the upper, the middle, and the lower. The upper section connects to the handle, the middle section telescopes out and locks into place, and the lower section attaches to the boot or shoe:
- Connect the upper section to the handle to assemble the pole.
- Extend the middle section and lock it into place.
- Attach the lower section to the boot or shoe.
How do you fix trekking poles on a backpack?
The trekking poles can be attached to the backpack in a few different ways. One way is to use the loops on the back of the backpack to attach the poles. Another way is to use the straps on the backpack to attach the poles. The trekking poles can also be attached to the side of the backpack.
How do you lock a trekking pole?
Trekking poles can be locked to prevent them from collapsing while in use. To lock a trekking pole, extend the pole until it is completely straight and then twist the locking mechanism on the handle until it is tight.
How do you walk with one hiking pole?
When hiking with one hiking pole, the hiker typically positions the pole in the opposite hand from the leg used to swing through the step. As the hiker steps forward with the left leg, they would use the hiking pole in the right hand to push off the ground and then step forward with the right leg. This same motion is repeated as the hiker walks.
Is it better to hike with one pole or two?
There is much debate over whether it is better to hike with one pole or two. Some people believe that having two poles makes you more stable and helps you move faster, while others think using one pole makes you more agile and efficient.
Ultimately, using one or two poles comes down to personal preference. Some people find that using two poles makes them feel more stable and comfortable. In contrast, others find that using one pole allows them to be more agile and efficient.
How to fix over extended hiking pole?
If your hiking pole is over-extended, you can fix the problem by adjusting the length of the pole. To do this, loosen the screw on the bottom of the pole and slide the pole section that connects the two halves up or down to the desired length. Once you have found the right length, re-tighten the screw to hold the pole in place.
How to grip trekking pole?
There are many ways to grip a trekking pole, but the most common is the handshake grip. Hold the trekking pole with your dominant hand and place your thumb on top of the grip and your four fingers below. Your other hand should grip the top of the trekking pole just below your dominant hand.
Conclusion
In conclusion, if your collapsible trekking pole is not collapsing correctly, there are a few things you can do to try and fix it. If those solutions don’t work, it may be time to purchase a new pole. Always be sure to read the manufacturer’s instructions thoroughly before attempting to fix your trekking pole.
